• Proizvodi
  • Usluge
  • fischer group
  • Kontakt
ETICS fixings in general
  • Product Category Picture: "Render fixing FIF-CN II 8"
  • Application Picture
  • Application Picture
  • Application Picture
    • Application Picture
    • Product Category Picture
    • Application Picture
    • Application Picture
      The pre-assembled anchor with innovative steel-plastic nail.

      Render fixing FIF-CN II 8

      The ETA approved fischer render fixing FIF-CN II is ideal for securely fixing pressure-resistant insulation up to 350 mm thick in the plaster façade such as polystyrene boards, mineral wool boards, wood wool lightweight panels and cork boards / coir matting in concrete, solid and perforated brick. The render fixing comprises a grey plug sleeve with attached preshaped octogonal disc and a steel-plastic nail. The FIF-CN II is set using a hammer. The innovative plastic nail with a steel point supports high loads.
      Varijante proizvoda
      Download of image data

      Varijante proizvoda

      Odobrenja / Izveštaji o ispitivanju
      15 Varijanta(e) proizvoda
      Drill diameter
      Min. drill hole depth
      Anchor length
      Max. fixture thickness
      Disc ø
      Amount
      Legenda = Dostupna dozvola— = Dozvola nije dostupna
      Pregledano 15 od 15 varijanti

      Prednosti / Opis proizvoda

      Advantages
      • To set with few hammer blows.
      • The plate fits tight into the insulation thanks to its thickness of only 2.7 mm. Thus allows the application of low-cost, thin reinforcement layers.
      • High retention forces thanks to the steel tip of the compound nail.
      • Small anchoring depth of 35 mm saves on drilling times.
      • The compression zone in the shank allows the plate to be drawn in precisely.
      • For insulating material thicknesses up to 340 mm.

      Prijava i odobrenje

      Applications
      • Fixing of ETICS insulation boards on concrete and masonry
      • Flush-to-surface installation in ETICS insulating materials like mineral wool or polystyrene
      Building materials
      • Building material classes A, B, C, D, E
      • Concrete
      • Full blocks made from concrete
      • Building brick
      • Solid sand-lime brick
      • Hollow blocks made from lightweight concrete
      • Vertically perforated brick
      • Perforated sand-lime brick
      • Lightweight aggregate concrete
      • Aerated concrete
      Detaljne informacije o građevinskom materijalu možete pronaći u dokumentu za registraciju.
      Odobrenja
      • ETA-18/0393
      • DoP No. 0255
      • EPD-FIW-20210314-CBD1-EN

      Uputstvo za montažu

      Functionality
      • The fixing is set in push- through installation.
      • Simple, fast setting by driving the compound nail in using a standard hammer.
      • Non load bearing layers such as adhesive and old plaster are included in the maximum useful length.
      Mounting Strip 1 Picture
      1 / 4
      • 1
        Mounting Strip 1 Picture
      • 2
        Mounting Strip 1 Picture
      • 3
        Mounting Strip 1 Picture
      • 4
        Mounting Strip 1 Picture

      Dokumenti za preuzimanje

      ETA Certification Document
      pdf, ETA-18/0393
      European Technical Assessment for fischer FIF-CN II - Nailed-in plastic anchor for fixing of external thermal insulation composite systems with rendering in concrete and masonry
      Napravljeno 29. 05. 2018.
      DOP - Declaration of Performance
      pdf, DoP No. 0255
      Declaration of Performance for FIF-CN II (Plastic anchors for use in concrete and masonry)
      Napravljeno 15. 01. 2021.
      EPD - Environmental Product Declaration
      pdf, EPD-FIW-20210314-CBD1-EN
      Environmental Product Declaration for fischer Insulation fixings
      Važi od 22. 02. 2022.
      do 21. 02. 2027.
      Load Table
      pdf,
      Render fixing FIF-CN II - ermissible loads for a single anchor for fixing of external thermal insulation composite systems with rendering.
      cd-blue-c6785f99-ht6vq