Br.art. 44118

fischer Nail anchor FNA II 6 x 30/75 with nail head electro zinc plated

Top Features
  • Hammerset installation saves time.
  • No reinforcement hits due to low anchorage depth This saves time and costs during series installation.
  • Expansion clip provides a firm hold.
  • ETA approval for multiple fixings.
  • Series installation possible with setting tool for the hammer drill. This saves time and costs.

Prednosti / Opis proizvoda

The installation-friendly Hammerset anchor for multiple fixings.
Advantages
  • The special active principle allows for a simple hammerset installation and, therefore, a short processing time.
  • The extremely short anchor depth prevents reinforcement hits, and creates the conditions for a trouble-free installation.
  • The optimised expansion clip ensures hold when placing in the drill hole, and prevents it falling out during overhead installations.
  • The massive shaft cross-section guarantees a high load-bearing capacity, thus offering an extremely high level of safety.
  • A range of head shapes allows for the fixing of wide-ranging fixtures, and for the ideal adaptation to suit the intended use.
The fischer nail anchor FNA II with nail head is made of zinc-plated steel. The FNA II is set in a time-saving manner in the push-through installation with just a few taps of the hammer. The installed FNA II expands automatically under load. The cone is then pulled into the expansion clip and expands it against the hole wall. Above all, the fischer nail anchor FNA II with nail head is suitable for fixing fire protection boards, wire and nonious hangers in internal areas.

Prijava i odobrenje

Applications
  • Fire protection plates
  • Fire protection boards
  • Ventilation systems
  • Wire and nonious hangers
  • Mounting rails
  • Metal clamps
  • Substructures made of wood and metal
Building materials
Approved for:
  • Concrete C12/15 to C50/60, cracked, for multiple fixings of non-structural applications
Also suitable for:
  • Solid sand-lime brick
  • Natural stone with dense structure
  • Prestressed hollow-core concrete slabs
Detaljne informacije o građevinskom materijalu možete pronaći u dokumentu za registraciju.
Odobrenja
  • ETA-06/0175
  • DoP No. 0235
  • GS 6.1/21-076-1

Uputstvo za montažu

Functionality
  • The FNA II with nail head is suitable for push-through installation. The FNA II M6 is suitable for pre-positioned and pushthrough installation. The FNA II OE and H
    are suitable for pre-positioned installation.
  • The installed nail anchor FNA II expands automatically under load. The cone is pulled into the expansion clip and expands it against the drill hole wall.
  • Available setting tools:
    FNA S-SBO to slip onto the drill,
    FNA S-SDS for series installation with a drilling hammer,
    FNA S-H for the manual installation of mounting rails.
Mounting Strip 1 Picture
1 / 4

Tehnički Podaci

ETA-approval
Anchor length (
l
)
112,5 mm
Drill diameter (
d0
)
6 mm
Min. drill hole depth for through fixings (
h2
)
115 mm
Max. fixture thickness (
t fix
)
75 mm
Head-ø (
dh
)
13 mm
Packaging Folding box
Amount 50 pcs.
GTIN (EAN-Code) 4006209441183

Dokumenti za preuzimanje

European Technical Assessment for fischer Nail anchor FNA II - Load controlled expansion anchor for multiple use for non-structural applications in concrete
Napravljeno 02. 03. 2021.
Declaration of Performance for fischer Nail anchor FNA II (Mechanical fastener for use in concrete)
Napravljeno 16. 03. 2021.
Test report (fire protection)
pdf, GS 6.1/21-076-1
Assessment of the load-bearing behaviour of fischer nail anchors FNA II R and FNA II HCR under tension load and one-sided fire loading according to the ZTV-ING-curve
Napravljeno 05. 10. 2021.
Nail anchor FNA II - Permissible loads for a single anchor for multiple use of redundant non-structural applications in normal concrete C20/25 up to C50/60.
cd-green-58bb58464c-5xn5l